The enclosed files are:

readme.txt        This file
CompSide.gbr      Components side/top/side 1         (note 1)
Ground.gbr        Max copper ground plane for side 1 (note 1)
Solder.gbr        Solder side/bottom/side 2          (note 2)
Mask.gbr          Solder mask silk screen
Drill.nc          Drilling schedule
example.gif       The artwork should look similar to this.
manual.pdf        PCB description, parts list, schematic

There is no silk screen for this PCB.

Note
----
1. Ground Plane
   Created by using the tracks & pads on the Comp Side but increasing the
   aperture list by 30 thou. This is then normally reversed and then merged
   with the comp side to create the top of a double sided board.
   
2. Side-2
   The thermal break artifacts previously noted in this file have been removed.

<end>